Aluminum Fence Around Pool: Riverview Install, Step by Step

An aluminum fence around pool decks and yards is the most common way Riverview homeowners close in a pool, because it keeps the yard open to view, does not rot or rust out in Florida weather, and can be set at the height and spacing pool barrier rules call for. The job runs in a set order: check what your county or city and your HOA require, measure the yard and plan the gate swing, mark utilities, set the posts, hang the panels, then fit and test a self-closing, self-latching gate. Most of the work on site takes a day or two. The step people most often get wrong is the gate, not the fence, so plan that part first.
What to Have Settled Before the Pool Fence Goes In
Three things decide whether the project goes smoothly or stalls halfway.
- The rules that apply to your pool. Florida's Residential Swimming Pool Safety Act (Chapter 515 of the Florida Statutes) sets barrier rules for new residential pools, including a barrier at least 4 feet high with no gaps a 4-inch sphere can pass through, and gates that open outward, away from the pool, and close and latch on their own. Your county or city may add its own rules, so check with them before anything is ordered.
- HOA sign-off. Many neighborhoods in Riverview and south Hillsborough set the color, style and height. Our post on getting HOA fence approval covers what boards usually ask for.
- A clear picture of the yard. Note where the pool equipment sits, where kids and pets come out of the house, and which doors open onto the pool area. Those decide where the fence runs and where the gate goes.
What makes the whole thing fail is ordering panels before the rules and the gate plan are settled. A fence that is the wrong height, or a gate that swings toward the water, has to be redone.
The Installation, Step by Step
Here is the order an aluminum pool fence goes in, with a fair idea of how long each part takes on a typical backyard.
- Plan the layout and gate swing (an hour or so on site). We walk the yard and mark the fence line and gate, because the gate has to open away from the pool and close by itself from any position.
- Mark underground utilities (a few business days of waiting). Lines are marked before digging, because a post hole through an irrigation line or a cable is an expensive surprise.
- Dig and set the posts (half a day to a day). Posts go in concrete at set spacing, since straight, solid posts are what keep the panels level and the gate closing true.
- Let the concrete set (overnight on most jobs). Panels are hung once the posts are firm, because loading a soft post pulls the line out of square.
- Hang and level the panels (a few hours). Each section is fastened and checked for level and spacing, so the bottom gap and the picket gaps stay small along the whole run.
- Fit the gate hardware (an hour or two). The gate gets self-closing hinges and a self-latching latch set high, because a pool gate that needs a person to close it is not doing its job.
- Test and walk it with you (30 minutes). We open the gate from different angles and let it go, because it has to close and latch every time, not most of the time.

The Step Most People Get Wrong: The Gate
Picture a homeowner who has a handyman put up a good-looking fence. The panels are straight and the height is right. Then someone props the gate open with a pool noodle on a busy Saturday, and nothing pulls it shut. Or the gate swings in toward the water, so a child leaning on it pushes it open. The fence is fine. The gate is the weak point.
You can tell the gate is wrong in a minute. Open it halfway and let go. If it does not swing shut and latch on its own, it needs new hinges or adjustment. If it opens toward the pool, it needs to be rehung. If the latch sits low enough for a small child to reach from outside, it needs to move up. Our gate installation work starts with exactly these checks.
Want to see what finished pool fences look like around Riverview yards? Browse our recent projects before you decide on a style.
How Long It Takes, Start to Finish
Time on site is short. The calendar time around it is longer. A fair picture for a typical backyard pool:
- Estimate and measuring: one visit, usually under an hour.
- HOA review: depends entirely on the board and how often it meets.
- County or city review, if your project needs one: check with them for current timing.
- Utility marking: a few business days after the request.
- Installation: one to two days for most yards; longer for a big perimeter, a slope or a lot of rock.
Cost follows the same factors: the length of the run, the height, the number of gates, slope and any old fence that has to come out. That is why every price starts with a free estimate on site. If you are still choosing a material, our comparison of an aluminum fence vs a vinyl fence lays out the trade-offs around a pool.

When to Hand It to a Fence Company
Some homeowners can hang a short run of aluminum panels. A pool barrier is a different job, because the gate, the gaps and the height all have to be right, every time, for the fence to do what it is there for.
Bring in a fence company when any of these apply:
- The pool is new, and the barrier has to meet state and local pool rules from day one.
- The yard slopes, so panels have to step or rack to keep the bottom gap small.
- The fence ties into the house, a screen enclosure or an existing fence.
- You need more than one gate, or a gate wide enough for a mower.
- The ground near the pool deck is packed fill or rock that is hard to dig.
On waterfront lots, where salt air is hard on metal and sightlines matter, aluminum is the usual pick. We serve those yards too, and our fence company in Apollo Beach page covers that area.
How Smith & Sons Fence Company Runs a Pool Fence in Riverview
Smith & Sons Fence Company is a family-owned fence company based in Riverview, FL, with quality installations since 1988. Aluminum is the pool fence we install, and our aluminum pool fence work follows the steps above on every job.
We start with a free estimate in your yard. We measure the run, mark the gate and its swing, and talk through what your HOA wants. We tell you to check the county or city rules before anything is ordered, and we build the fence to the plan you settle on. On install day, we set the posts, hang the panels, fit the self-closing hinges and the latch, and test the gate with you before we leave. We are open every day, 8am to 8pm, so evening and weekend questions get answered.
Curious what other homeowners say about working with us? Read our customer reviews before you book.
Aluminum Pool Fence FAQ
How tall does a pool fence need to be in Florida?
Florida's pool safety law calls for a barrier at least 4 feet high for new residential pools. Your county or city may add to that, so confirm before you order.
Does a pool fence gate have to open outward?
Under Florida's pool barrier rules, gates should open outward, away from the pool, and close and latch on their own.
Is aluminum a good fence for a pool in Florida?
Yes, for most yards. It holds up to sun and rain, does not rot, and keeps the pool in view from the house.
How long does it take to install an aluminum pool fence?
Most backyard pool fences take one to two days on site, after the planning, HOA review and utility marking are done.
Can an aluminum fence go on a sloped yard?
Yes. Panels can be stepped or racked to follow the slope so the gap under the fence stays small.
Do I need HOA approval for a pool fence?
Many Riverview neighborhoods require it, and they often set the color, style and height. Check with your HOA before you order.
Can I add a pool fence to an existing fence?
Often, yes. The new section ties into the existing fence, as long as the whole barrier still meets the height, gap and gate rules.
Get a Free Pool Fence Estimate
Tell us about your pool, your yard and your HOA, and we will walk the fence line with you. Get a free quote from Smith & Sons Fence Company and we will measure, plan the gate and give you a clear price for your aluminum pool fence anywhere we serve around Riverview.
