Fence tips and guides

Questions to Ask a Fence Company in Riverview, FL

White vinyl privacy fence behind a backyard patio seating area in Riverview, FL

The questions to ask a fence company come down to one goal: making every quote spell out the same job so you can compare them fairly. In Riverview, FL that means asking what material, height, style and color are included, how many gates and what hardware, whether tear-out and haul-away of the old fence are in the price, how the posts are set, how slopes and tight side yards are handled, and what the company needs from you for HOA approval. A quote that answers all of that in writing is worth more than a lower number that leaves half of it blank. Ask the same questions of every company and the real differences show up fast.

What moves a fence quote, and the question to ask about each

Five things decide most of what a fence costs, and each one comes with a question that keeps the quote honest.

  • Length. Ask how the company measured the run and whether the number matches your survey, not a guess from the street.
  • Height and style. Ask which height and which style are quoted, for example a 6 foot vinyl privacy fence or a 4 foot aluminum fence, and get it in writing.
  • Material. Ask for the exact material: vinyl in white or tan, aluminum, or pressure-treated pine in stockade, board on board or horizontal.
  • Gates. Ask how many gates, how wide each one is and what latch and hinges come with them.
  • The ground and the old fence. Ask how slopes, roots and tight side yards are handled, and whether removing and hauling off the old fence is included.

Every one of those can change the number, so a quote that names all five is one you can actually compare.

Why two fence quotes for one Riverview yard can be far apart

Two companies can look at the same backyard and quote very different numbers without either one being dishonest. Usually they are quoting different jobs.

One includes tearing out the old wood fence and hauling it away, the other assumes you already did. One counts two gates, the other one. One measured to the survey line, the other to the corner of the house. One quoted a lower height than your HOA allows, so the price looks better until the approval comes back. On a sloped lot near a pond, one may have planned for stepping the panels and the other did not.

The fix is not to pick the middle number. Ask each company the same questions, line them up, and the gap usually explains itself. If the spread is still wide after that, ask the lower quote what it left out.

Line by line: what a complete quote covers, and the extras

Here is the difference between a thin quote and a complete one, item by item. Use it as a checklist when the estimates come in.

Line itemThin quoteComplete quote
Fence panels and postsOne totalMaterial, style, height, color
Gates"Gates extra"Each gate's width and latch
Old fenceNot mentionedTear-out and haul-away named
PostsNot describedHow each post is set
SlopeNot mentionedStepped or racked, noted
CleanupNot mentionedSite cleanup included

The extras that quietly show up later are almost always the ones a thin quote skipped: a gate added on install day, moving the line after the survey turns up, old concrete footings or big roots in the post holes, or a taller fence after the HOA weighs in. Ask about each one before you sign, not after the crew arrives.

Planning a gate as part of the job? Our fence gates page shows the single and double gates we hang on vinyl, aluminum and wood fences.

Cheaper routes, and the question that shows what each one skips

There are honest ways to bring a quote down. Each one trades something away, so ask what it costs you besides money.

  • Fence part of the yard. Fencing only the back and leaving the sides open costs less, but it may not keep a dog in or meet a pool barrier rule.
  • Fewer gates. One gate instead of two saves money until you need to get a mower or a trailer into the back.
  • Wood instead of vinyl. Pressure-treated pine usually costs less up front, but it needs staining and more upkeep over the years.
  • Tear out the old fence yourself. You save the removal line, but you take on the hauling and the risk of damaging sprinkler lines on the way out.
  • Buy your own materials. You may save on the materials, but if a panel is wrong or damaged, sorting it out is on you.

The question to ask each time is simple: what does this change about how the fence works, looks or lasts? If the answer is "nothing you will notice," it is a good saving.

Wood double gate in pressure-treated pine

When the higher quote is the better deal, and when it is not

Paying more makes sense when the extra buys something you would otherwise pay for twice. A pool fence is the clearest case: Florida's pool barrier rules call for gates that close and latch on their own, so a quote that gets the gates right the first time beats one you have to fix. HOA neighborhoods are another, because a fence built to the wrong height or color can mean redoing it. Replacing a storm-damaged fence properly, instead of patching the same leaning section every season, also tends to pay back.

It does not pay back when the higher price is for things you did not ask for, like a taller fence than your yard needs or a style upgrade on a run nobody sees. If you are weighing materials, our comparison of aluminum fence vs vinyl fence lays out what each one is good and bad at.

Questions to ask a fence company before you sign

The best estimates start before anyone visits. Send the company your survey, a few photos of the yard, your HOA rules if you have them, and where you want the gates. Then ask:

  1. What exactly is included, line by line, and what is not?
  2. How will the posts be set, and how will you handle the slope?
  3. Who arranges the underground utility locate before digging?
  4. What do you need from me for the HOA application? Our post on HOA fence approval covers how that usually goes.
  5. When can you start, and what could move the date?
  6. How and when do you take payment?
  7. Who will be on site, and who do I call if something looks wrong?

A straight answer is specific and lands in writing. "We'll figure it out on site" is not one. Check with your county or city and your HOA about their rules yourself too, so nothing surprises you after the fence is up.

Smith & Sons Fence Company is a family owned business based in Riverview, FL, with quality installations since 1988, and we answer every one of these at a free estimate. We handle vinyl fence installation, aluminum fences around pools and pressure-treated pine privacy fences, and we are open every day from 8am to 8pm. If you are starting from scratch, our page on fence installation in Riverview shows how a job runs from the first visit to the last post.

Want to see what finished work looks like before you ask anyone a question? Browse our recent fence projects around Riverview and the towns we serve.

Fence quote questions FAQ

What should I ask a fence contractor before hiring?

Ask what is included line by line, how the posts are set, how many gates and which hardware, whether old fence removal is in the price, and when they can start. Get every answer in writing.

How do I compare two fence quotes?

Line them up item by item: material, height, style, color, gates, removal, post setting and cleanup. A gap in price usually means a gap in what was quoted.

Should a fence quote include removing the old fence?

It should say either way. If removal and haul-away are not listed, ask, because it is one of the most common reasons quotes differ.

What should be in a written fence estimate?

The length, height, style, material and color, each gate and its hardware, removal of any old fence, how posts are set, how slopes are handled, and cleanup.

Do I have to call 811 before a fence is installed?

Yes, underground lines have to be located before anyone digs post holes. Florida uses Sunshine 811 for that, so ask your fence company who places the request.

What questions should I ask about a pool fence?

Ask whether every gate closes and latches on its own, which Florida's pool barrier rules call for, and how the fence will meet the pool deck and the house.

Should I share my survey with the fence company?

Yes. A survey lets the company measure to your real property line, so the quote matches where the fence can actually go.

Bring your questions to a free estimate

Send us your survey, a few photos of the yard and your HOA rules if you have them, and bring every question on this list to the estimate. We will walk the line with you and put the answers in writing. Get a free quote from Smith & Sons Fence Company.